Instrument Operation
The feature is available if the turntable has empty positions.
1. Press at any point during testing.
The system completes the current sample. The turntable moves to
the next available test position. Status shows READY.
2. If the user ID is required, log in before loading more samples.
3. If the sample ID is required, enter it or scan the barcode.
4. Press ENTER.
5. Load the sample and do one of the following:
• Press to advance to the next position.
• Press to start testing.
Testing continues at the first untested position.
Load more samples during processing
20
To Next Page
Loading...
