Advanced Instruments OsmoTECH PRO Installation & Training Guide

• Step 7 – Powering up the instrument
• Connect the power cord to the back of the instrument and insert the plug into the power outlet.
• Turn the power switch ON.
• After a few moments, the OsmoTECH PRO Splash screen appears while the system starts up. You
will then see the Home Screen, you can initiate sample testing and view the results, Initially, the
instrument status shown in the green status banner is READY.
Installation and Setup
Splash Screen
Home Screen

Advanced Instruments OsmoTECH PRO Specifications

General

Brand	Advanced Instruments
Model	OsmoTECH PRO
Category	Measuring Instruments
Language	English