Advanced Poly-Packaging T-1000 - 1.4 System Integration; 1.5 Additional Options Available

Maintenance Counter/Chart - Periodically check this counter (total machine cycles) to
determine preventative maintenance / component inspection intervals for inspection /
maintenance criteria and intervals.
Continuous Strip Option - Leave bags connected in an "endless" strip or a predetermined
number of strips of sealed bags.
Networking Capability - Allows remote access to PLC for production and status reports.
Communications Port/Modem - Allows for auxiliary communications.
Anti-Jam Device - During the loading and sealing operation, this device will detect
obstructions and automatically reverse the pressure bar and discontinue the cycle operation.
Castors Assembly - Rugged castors are standard for plant mobility.
1.4 System Integration
The T-1000 is preprogrammed to integrate automatically to major brand vibratory counters and
feeders, weigh scales, volumetric fillers, auger fillers and infeed conveyors. As an OEM for
numerous equipment manufacturers of infeed systems, we can offer the best available system,
with the T-1000 Advanced Poly-Bagger as the integral packaging component.
FREE CONSULTATION AND PRODUCT EVALUATION: We invite you to call to discuss
your packaging requirements and our free product packaging analysis.
1.5 Additional Options Available
Although the T-1000 is extensively equipped with many "built-in" options described above,
various auxiliary options and equipment can easily be added for special purpose packaging. The
following options may be purchased from Advanced Poly-Packaging, Inc.
AF-10 Accumulating Funnel - Increase production by allowing a continuous infeed of
product into the funnel without regard for the operation of the T-1000. The Accumulating
Funnel will collect the product while the bag is sealing. Once another bag is in position and
blown open, the funnel discharges the product into the bag without stopping the flow of product
into the funnel.
BB-10 Bag Blow-off Assembly - Allows for faster packaging of lighter products by
stripping bags from seal bar. Also used when bags stick to PTFE Anti-Stick Sheet or seal bar.
BF-10 Bag Deflator (sponge or rubber loop) - Flattens package by removing air from bag
before sealing.
CF-10 Counting Funnel - Preprogrammed, the T-1000 Counting Funnel counts product
entering the funnel or bag and signals the T-1000 to seal the bag when the preset quantity has
been reached. The Counting Funnel may operate in conjunction with the Accumulating Funnel
for fully automatic operations.