Input Indicators (LEDs) X
Bag out (no bags)F
Printer (Busy)E
Counting-Funnel Sensor (Auto Detect)D
Printer (No Foil) Alarm C
Open Thermocouple Alarm (Caution: Should never be lit)B
Inner Frame Open SensorA
Palm Button (Right)9
Palm Button (Left)8
Anti-Jam Over-ride Sensor (Pressure Bar)7
Auxiliary Input Signal (Dump product)6
Perf Sensor Position (P.S. Board)5
Foot Switch4
Anti-Jam Sensor (Pressure Bar)3
Reserved2
Reserved1
Heater Bar Temperature Readout (Thermocouple)0
I.F. Board Lights (Fig. 4-9)
NeonClutch DCN7
NeonBrake DCN6
NeonPrinter AC OFFN5
NeonHeater Pulse ACN4
NeonMotor ACN3
NeonPerf Sensor ACN1
RedOpen Thermocouple AlarmE13
RedReservedE12
RedAuxiliary 3E11
RedPrinter (No foil)E10
RedOptical Sensor (In)E9
RedPalm Button (Right)E8
RedPalm Button (Left)E7
RedAuxiliaryE6
Clear PrinterE5
AmberHeaterE4
GreenDrive MotorE3
RedBrakeE2
GreenClutchE1
I.F. Board Fuses (Fig. 4-10)
3.15 AMPAuxiliaryF6
10 AMPHeaterF5
3.15 AMPMotorF4
1 AMPBrakeF3
1 AMPClutchF2
2.5 AMPD.C. Power SupplyF1
147
To Next Page
Loading...
