Advantech DS-980 - 4.2.2.8 CPU Configuration

DS-980/DS-980GL User Manual 26
3.10 Stand Rubbers Installation
1. Upside down the device first on a flat and clear floor.
2. Both of DS-980/DS-980GL configurations, using the outer of screw holes to
install the stand rubbers (number 2) by 4 screws (number 1).
3. Upside down the device and exactly make sure the stand rubbers are fixed and
keep the device balance.
Figure 3.11 Stand rubbers installation
1
1
1
1
2
2
2
2