Web GUI Monitoring & Control
Figure 4.14: Saving a New Profile
To overwrite an existing profile:
1. Select the profile to be overwritten from the main Profiles window.
2. Enter a new profile name (e.g. MuxA) in the adjacent text box.
3. Select ‘Save’.
4.7.7.2 Loading Existing Profiles
To load an existing named profile:
1. Select the profile to be loaded from the main Profiles window. A window similar to that
shown in Figure 4.14 is displayed.
2. Select ‘Load’.
3. Select ‘Configure’ to activate the profile.
SBM75e Series Modulator Installation and Operation Manual
4-19
To Next Page
Loading...
General