3.2.2.2 PCH-FW Configuration
◼ ME State
When this item is disabled, ME will be put into ME Temporarily Disabled
Mode.
◼ Manageability Features State
This item allows users to enable/disable Intel® Manageability features.
Note: This option disables/enables Manageability Features in FW. To disa-
ble, the supported platform must be in an un-provisioned state first.
◼ AMT BIOS Features
When this item is disabled, AMT BIOS features are no longer supported and
user is no longer able to access MEBx Setup. Note: This option does not
disable Manageability Features in FW.
◼ AMT Configuration
This item allows users to configure Intel® Active Management Technology
parameters.
◼ ME Unconfig on RTC Clear
When this item is disabled, ME will not be configured on RTC clear.
◼ Core Bios Done Message
This item allows users to enable/disable Core Bios Done message sent to
ME.
◼ Firmware Update Configuration
This item allows users to configure the management engine technology pa-
rameters.
To Next Page
Loading...
