- EDIT: allows you to edit the contents of an encoding list by modifying the list identifier
name (EDIT), modifying the algorithms that comprise it (by adding an algorithm with
INSERT or eliminating one with DEL) and by changing their order of preference (by
pressing MOVE, then selecting a line and moving it by means of the rotatory encoder
and finally pressing ENTER to placed it in its new position).
List of algorithms of a SIP CODEC PROFILE and editing options
To quit this menu and return to the immediately previous SYSTEM MENU, simply press the
ESC button.
3.2. HPHONES menu.
From this option of MAIN STATUS menu you can assign any of the signals available in the
PHOENIX STRATOS to the headphones output available in the front panel. This headphones
output for control monitoring enables you to associate different signals in the left and right
channels.
The HPHONES menu screen, in addition to allowing you to configure this monitoring output,
displays the current configuration in the right-hand portion of the screen before making any
change (in the example, the left headphone monitorizes the left input to channel 1 and the right
one monitorizes the right output of channel 2).
HPHONES menu detail
By pressing the rotatory encoder over “L CHANNEL”, you can select the signal that you will
listen on HP_L (left headphone):
- IN_CH1_L: Left audio input to communication channel 1.
- OUT_CH1_L: Left audio output of communication channel 1.
- IN_CH2_L: Left audio input to communication channel 2.
- OUT_CH2_L: Left audio output of communication channel 2.
- IN_CH1_R: Right audio input to communication channel 1.
- OUT_CH1_R: Right audio output of communication channel 1.
- IN_CH2_R: Right audio input to communication channel 2.
- OUT_CH2_R: Right audio output of communication channel 2.
You can shift among the various options by turning the rotary encoder. You can okay an option
by pressing on the rotary encoder.
By pressing the rotatory encoder over “R CHANNEL”, you can select the signal that you will
listen on HP_R (right headphone) from an identical list.
To quit this menu and return to the immediately previous MAIN STATUS menu, simply press the
ESC button.
Headphones volume can be modified by means of the potentiometer placed besides the
corresponding connector in the front panel.
To Next Page
Loading...
Need help?
General