AEQ Audio Over IP
Routing System
31
Operating System Updates.
Ensure your PC has the latest Windows updates installed.
Firewall Configuration.
Firewall configuration for Windows Firewall is automatically handled during installation. "Dante
Controller" communicates over UDP over the following ports:
- Dante Control and Monitoring: 8700-8705, 8800
If you are using a third-party firewall product, use the port information provided above to
configure it accordingly.
Monitor Requirements.
A display resolution of at least 1024 x 768, with a screen size of at least 19" is recommended for
"Dante Controller".
4.3. Installing "Dante Controller".
4.3.1. Downloading "Dante Controller".
"Dante Controller" is available for download from Audinate’s website. It’s also available in the
auto run disk furnished with AEQ equipment.
To download a copy of "Dante Controller":
1. Go to the Audinate website: www.audinate.com.
2. Navigate to Products > Dante Controller.
3. Under "Download", choose your operating system.
4. Click the red download button.
This will take you to the appropriate "Dante Controller" release page for your operating system.
Click the link under "File downloads" to download the "Dante Controller" installer.
4.3.2. Installing "Dante Controller" on Windows.
Once you have downloaded the self-installing "Dante Controller" file, navigate to the directory
where you have downloaded it (e.g. Desktop).
To install "Dante Controller":
1. Ensure you are logged on to your PC as an administrator.
2. Navigate to and double-click the "Dante Controller" installer file.
3. Read the license agreement. If you agree to the terms, select the 'I agree' checkbox and
click Install. If you do not agree to the terms, click Close.
4. Confirm / acknowledge any Windows security prompts that are displayed.
"Dante Controller" will then be installed. "Dante Controller" will be added to the start menu,
under "Audinate".
4.3.3. Updating "Dante Controller" on Windows.
"Dante Controller" can be updated directly from the application itself.
NOTE: Requires an active Internet connection.
Checking for Updates Manually: From the Help menu, select "Check for Updates".
Checking for Updates Automatically: "Dante Controller" can also check for updates
automatically. If an update becomes available, you will be notified via a pop-up message. To
activate automatic checking, in the update dialog, select the option to check for updates
automatically.
To Next Page
Loading...
Need help?
General
