AEQ Audio Over IP
Routing System
103
7. TECHNICAL SPECIFICATIONS.
- Data format: DANTE Audio-over-IP technology.
- AVB - ready.
- Plug-and-play technology - automatic detection of the hardware and simple audio
routing.
- Precise sample-level synchronization, even through several switches.
- Very low and deterministic delay in the entire network.
- Flexible and scalable network topology, supporting a great number of audio transmitters
and receivers.
- Works in 100 Mbps, 1 Gbps and 10 Gbps networks.
- Supports a single integrated network used for audio, video, control and monitoring.
Compatible with other kinds of traffic using QoS management.
- Uses low-cost, off the shelf network infrastructure.
- 24-bit, 48 KHz. audio resolution.
- Delay: 1 - 1.5 ms (@ 48 KHz, typical, depending on type of device and network
performance and complexity).
- 2 RJ45 Ethernet ports per interface, 1000 BASE-T or 100 BASE-T depending on the
device, galvanically isolated, that can be used for redundancy or daisy-chain
connections.
- Binary rate: 10/100/1000 Mbps.
- Maximum segment length: 100m max. over CAT5e or better cabling.
Number of channels in each device.
- NETBOX 4 MH: 4 bidirectional.
- PHOENIX VENUS V3: 4 bidirectional.
- NETBOX 8: 8 bidirectional.
- OLYMPIA 3: 8 bidirectional.
- CAPITOL IP: 16 bidirectional.
- FR14 (FORUM): 32 bidirectional.
- BC2214 (ARENA - BC 2000 D): 32 bidirectional.
- NETBOX 32: 32 bidirectional.
- BC2224 (ARENA - BC 2000 D): 64 bidirectional.
- NETBOX DSP 64: 64 bidirectional.
- NETBOX DSP 96: 96 bidirectional.
- NETBOX DSP 128: 128 bidirectional.
- NETBOX DSP 160: 160 bidirectional.
May 2019. Specifications subjected to evolutionary changes. Download the latest version of the
manual at www.aeq.es, www.aeq.eu or www.aeqbroadcast.com.
To Next Page
Loading...
Need help?
General
