Aeroo Pro - Aircraft Battery; Charging

2.2 Aircraft Battery
2.2.1 Aircraft Battery Charging
AI Flight Battery
Single Charger
Power Adapter
Charging Station (Combo)
1. Connect the Single Charger or Charging Station (Combo) into the Power
Adapter, and then into the wall socket, switch the wall socket ON.
2. Carefully align the charging pins with the battery connection pins, and
connect. After a few seconds the battery will begin charging.
3. Battery indicator lights will flash sequentially while charging, when complete,
all 4 lights will turn off.
Aeroo Pro uses an AI 6S lithium battery with a capacity of 4000mah and a nominal
voltage of 21.6v. The battery has its own internal management system, to
intelligently adjust power output and safely discharge over time. The battery also
uses industrial high temperature resistant cells for use in extreme environments.
• The charge time is approximately 100 Minutes (Charging Station) and 240
minutes hours (Single Charger).
• Aeroo Pro supports (100v-240v, 50-60Hz) AFC/FCP/PD2.0/PD3.0
fast charging.
• The Charging Station will sequentially charge up to 4 batteries one at a time,
Important: Always fully charge the battery after each use. Leaving the battery low
for extended periods will cause irreversable damage.
8