4.3 Firmware Updates
Occasionally, or before the first use, firmware updates will be available for the
App, Aircraft, Battery or Remote. These updates may add new features or improve
the stability/reliability of existing features.
After powering on the aircraft and remote, you can update the firmware:
• When prompted in the app interface.
• In the App Settings > General Purpose > Version > Check for updates.
i. After clicking “Check for updates” the button will either be
unresponsive (no update available) or change to “Update” which you
can click to begin the update.
Firmware Update Notes:
• Your mobile device must be connected to internet to update firmware.
• Follow the instructions exactly as prompted in the app.
• The update will first download, then install, after which you will be
prompted to restart the aircraft, remote and app.
Troubleshooting:
• It is normal for updates to take over 30 mins. Ensure the aircraft, remote
and app are kept on throughout the entire update. Allow up to 1 hour
(internet speed depedent) and do not leave the update screen in the app.
• In the event the update fails, please try again. After repeated failed updates,
press “Clear upgrade files” (top right of update screen). Then restart the
aircraft and remote completely before re-attempting.
• Please note that after clearing update files, the aircraft will delete any
partial updates and revert to the previous version.
• Ensure your Aeroo Fly account is setup and the aircraft is bound to your
account. This can be checked in the home screen > Profile (top right) >
Equipment Management > Aeroo Pro. Click “Bind Account” if shown.
29
To Next Page