1. Enter AI Flight Modes (left side of app) and select “Following Mode”
2. Select “Follow Me”
3. The aircraft will follow the remote at the set parameters, you can manually
fly to adjust the camera angle.
Follow me, uses the remote controller's GPS position to track where you are, the
aircraft will then follow it at the set parateters. The below “Active Track” modes are
recommended for most follow scenarios.
Active Track allows you to select any subject and the aircraft will visually follow it
as the subject moves.
1. Enter AI Flight Modes and select “Following Mode”
2. Select “Active Track”
3. Select which active track mode to use.
4. Draw a box around the subject and hit “GO”
The aircraft must be within 15m of the subject for to work, maximum speed is
limited.
Trace: Follows the subject from behind.
Parallel: Follows the subject from side on.
Orbit: Does a 360° circle around the subject.
Target: Keeps the camera focused on your subject while you fly in any direction. To
use “Target” simply enter any active track mode, draw a box around the subject
and then manually fly (do not hit "GO").
5.10.2 Follow Me
5.10.3 Active Track
46
To Next Page