2.3 Propellers
Aeroo Pro is fitted with high strength polycarbonate foldable propellers, for
convenient storage, setup and flight performance. Spare propellers are included in
each kit as standard. Use only Aeroo branded propellers.
• Immediately replace any propellers that have cracks, chips, warping or
fractures.
• Always replace both propeller halves together, even if one side is undamaged.
• IMPORTANT: Match “A” Propellers with “A” Arms and “B” Propellers with “B”
Arms.
Replacement Process:
1. Unscrew the 2 screws holding in the propeller bracket.
2. Lift up the bracket and lift the propellers.
3. Push the propeller blades onto the motor and secure with the bracket. Ensure
the correct A/B letter markings are face-up.
4. Firmly tighten the screws to secure.
IMPORTANT: Check all screws are tight before each flight.
Aeroo propeller screws
come with blue loctite applied.
12
To Next Page