2.7 GPS
Aeroo Pro has an advanced GPS system, which connects to the Global Satellite
System. After powering on, the aircraft will acquire 20+ satellites to measure its
precise position at all times. This enables functions including Pause (hover when
taking your hands off the remote), Auto Return Home, Smart Flying Modes and
waypoint flying/bait-drop memory.
• Areas with other remote signals, metal or telegraph lines can interfere with
the GPS signal and Compass. Always fly in a clear, open area.
• We recommend performing a Compass Calibration before each flight for
maximum stability. It will occasionally be required before takeoff if you are in
an area with high interference.
2.8 Motors
Aeroo Pro is equipped with an industrial strength Motor and ESC system, capable of
consistent performance and high temperature resistance.
• Burn Risk: Do not touch the motors after flight.
• Always keep any payload and payload attaching line clear of the motors, to
avoid tangles or damage to the motor/motor mounts.
• In the event of a line tangle with the motors, carefully unwind the line in the
direction of the tangle, prying into the motor may cause permanent damage.
2.9 Landing Light
Aeroo Pro is fitted with an ultra bright LED Landing Light (also referred to as Auxilery
Light). This enables identification of the aircraft in low lit environments, as well as
enhanced performance of the onboard vision systems.
• The landing light can be turned on/off/auto in the flight interface via Settings
> Aircraft > Auxilery Light.
• Automatic will turn the light on only while landing or when vision sensors
require it.
15
To Next Page