EasyManua.ls Logo

Aeroo Pro - Vision Systems

Aeroo Pro
59 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2.10 Vision Systems
Aeroo Pro has both an optical and infrared downward vision sensor system (also
referred to as TOF). These are designed to measure the distance below the drone
(Infrared) and read the terrain for stability (Optical).
When carrying a payload or in Sport Mode, the Downward Vision Sensors will
automatically turn off. This is to eliminate inaccurate ground readings and
improve stability while carrying a payload in flight.
The sensors work between 0.5m - 50m altitude (best <5m), and is
predominantly used where GPS signal is weak or unavailable.
These systems are not a means for avoiding obstacles and should not be
relied upon as such.
The Vision System may not function properly when the aircraft is flying over
moving or extreme light/monochrome areas such as water, snow or reflection.
The aircraft will not automatically detect or avoid any water below. Never rely
on the vision systems.
Ensure the sensors are regularly wiped clean and unobstructed at all times.
Landing Light
Downward Vision
Sensor
Infrared Sensor
16