Standby
Protection
Key / Switch
Function
After leaving the Remote Controller on and unused for 10
minutes, it will start beeping once every 3 seconds. After
3 minutes of beeping, the Remote Controller will
automatically shut down.
Low Power Mode
When the Battery Power of the remote controller is less
than 10%, the remote controller enters low power
consumption mode. This cuts off
If the Remote Controller Battery is less than 10%, the
remote enters low power mode and cuts off any
connection to the Mobile Device. You will not be able to
see any live camera iew, however the connection
between the remote and drone will remain unaffected.
24
To Next Page