Afag CS 8/10-SD - Installation, Assembly & Setting; Safety Instructions for Installation & Assembly

Installation, assembly & setting
Assembly instructions EN  CS 8 - CS 12  Date 01.06.2021  Version 4.5 31–56
6 Installation, assembly & setting
This chapter contains specific safety instructions and information regarding
proper installation, assembly and setting of the compact slides including their
connection to the control unit and the pneumatic system.
Safety Instructions for Installation & assembly
Also observe the safety instructions in  chap. 2 „Safety instructions“ in this
manual.
CAUTION
Danger of injury when connecting the compact slide to the control unit
and the compressed-air system!
When connecting the compact slides to the control unit or the compressed-
air system sudden, unpredictable movements may occur which can cause
personal injury or property damage.
 Installation may only be carried out by a qualified specialist!
 Read carefully the assembly and safety instructions before working with or
on the compact slides.
CAUTION
Danger of injury when handling the compact slides!
Careless handling of the compact slides can cause personal injuries and
damage to the modules.
 Only qualified personnel may work with or on the module!
 Observe the assembly instructions!
NOTICE
No liability for damages can be assumed for damages caused by improper
installation/assembling work on the part of the operator.