Afag CS 8/10-SD - Disposal

Decommissioning, disassembly, disposal
50 – 56 Assembly instructions EN  CS 8 - CS 12  Date 01.06.2021  Version 4.5
Disposal
The compact slide must be disposed of properly at the end of their service life
and the raw materials used must be recycled. Observe the legal regulations and
company requirements.
The compact slide must not be disposed of as a complete unit. Dismantle the
compact slide and separate the various components according to type of
material and dispose of them properly:
 Scrap the metallic materials.
 Hand over plastic parts for recycling.
 Sort the rest of the components by their material properties and dispose of
them accordingly.
NOTICE
Risk to the environment due to incorrect disposal of the compact slides!
Environmental damage can be caused by improper disposal of the compact
slide.
 Electronic parts, electrical scrap, auxiliary and operating materials must
be disposed of by approved specialist companies.
 Information on proper disposal can be obtained from the responsible local
authorities.