Afag CS 8/10-SD - Maintenance Activities and Maintenance Intervals; Overview of the Maintenance Points; Fig. 16 Maintenance Points Compact Slide (CS 8 and CS 12)

Maintenance and repair
Assembly instructions EN  CS 8 - CS 12  Date 01.06.2021  Version 4.5 45–56
Maintenance activities and maintenance intervals
9.3.1 Overview of the maintenance points
Fig. 16 Maintenance points Compact Slide (CS 8 and CS 12)
No. Maintenance point Maintenance work
Interval
System
[On/Off]
Remarks
1
Compact Slide
Cleaning
As required [Off]
-
 Clean the compact slide with a dry, lint-free cloth.
- do not spray with water
- Do not use aggressive cleaning agents.
2
Shock absorber*
Check functioning
Monthly [On]
 Check function of shock absorbers, replace if necessary

replacing after max. 5 million load cycles
3
Compact Slide
Check
Monthly [On]
-
 Acoustic control for unusual noise generation
Incorrectly adjusted, missing or defective shock absorbers impair the function
of the module and can lead to its destruction!
*Shock absorbers and stop screws must be checked regularly for correct
function and replaced if necessary. We recommend replacing the shock
absorbers after max. 5 million load cycles.