Afag CS 8/10-SD - Contents and Purpose of These Assembly Instructions; Explanation of Symbols; General

General
6 – 56 Assembly instructions EN  CS 8 - CS 12  Date 01.06.2021  Version 4.5
1 General
Contents and purpose of these assembly instructions
These assembly instructions contain important information on assembly,
commissioning, functioning and maintenance of the compact slides CS 8 and/or
CS 12 to ensure safe and efficient handling and operation.
Consistent compliance with these assembly instructions will ensure:
 permanent operational reliability of the compact slide,
 optimal functioning of the compact slide,
 timely detection and elimination of defects (thereby reducing maintenance
and repair costs),
 extension of the service life of the compact slide.
The illustrations in this manual shall provide you with a basic understanding of
the module and may vary from the actual design of your module.
Explanation of symbols
The safety notes are marked by a pictogram and a signal word. The safety notes
describe the extent of the hazard.
DANGER
Danger!
This safety note indicates an imminently hazardous
situation which, if not
avoided, will result in death or serious injury.
WARNING
Warning!
This safety note points out a potentially hazardous situation which, if not
avoided, could result in death or serious injury.
CAUTION
Caution!
This
safety note points out a potentially dangerous situation which, if not
avoided, can result in minor or slight injuries.
NOTICE
This safety note points out a potentially dangerous situation which, if not
avoided, can cause substantial damage to property and the environment.