AGFA CR 10-X - Page 16

Color Constant/
Blinking
Status Action
Blinking Busy with erasing
and return of the IP
into cassette
Wait.
Green Constant Standby mode
(Ready)
Cassette is ready
for removal
Proceed.
Remove cassette.
Yellow
Blinking Busy with
scanning, erasing
and return of the IP
into cassette
Wait.
Red Constant Error Consult the Digitizer
Remote Display UI (User
Interface) messages on
the control PC. Refer to
section
‘Troubleshooting’.
Blinking slowly Digitizer not ready
Blinking fast Digitizer not
connected to
Digitizer Remote
Display UI
Refer to section
‘Troubleshooting’.
Blinking - 3
pulses
Digitizer not
connected to
control PC
Related Links
Troubleshooting on page 59
16 | CR 10-X, CR 12-X, CR 15-X | Introduction
2491E EN 20150409 1543