Step 4: Remove the cassette and insert the next one
At the digitizer:
1. When the digitizer has finished treating the cassette, the status indicator
constantly lights up in green.
2. Push the Cassette release button and remove the cassette from the cassette
slot.
Note: When you unlock the cassette, it is ready to be re-used
immediately. However, if you leave it for more than 2 days
before re-using it, you must re-erase it first.
Related Links
Re-erasing an Image Plate on page 52
46 | CR 10-X, CR 12-X, CR 15-X | Getting started
2491E EN 20150409 1543
To Next Page
Loading...
