Labels
Always take into account the markings and labels provided on the inside and
outside of the machine. A brief overview of these markings and labels and
their meaning is given below.
Safety warning, indicating that the manuals
should be consulted before making any
connections to other equipment. The use of
accessory equipment not complying with the
equivalent safety requirements of this digitizer
may lead to a reduced level of safety of the
resulting system. Consideration relating to the
choice of accessory equipment shall include:
• Use of the accessory equipment in the patient
vicinity,
• Evidence that the safety certification of the
accessory equipment has been performed in
accordance with respective IEC standards (e.g.
IEC 60950 for data processing equipment or
IEC 60601-1 for medical equipment).
In addition all configurations must comply with
the requirements for medical electrical systems
according to IEC 60601-1. The party that makes
the connections acts as system configurator and is
responsible for complying with the systems
standard.
If required contact your local service organization.
In order to reduce the risk of electric shock, do not
remove any covers.
Caution hot:
Keep hands clear from the erasure unit.
Power button
26 | CR 10-X, CR 12-X, CR 15-X | Introduction
2491E EN 20150409 1543
To Next Page
Loading...
