AGFA CR 10-X - Page 76

Temperature -25 °C - +55 °C
Environmental conditions (during transport)
In line with IEC721-3-2 (1997): class 2K2 and 2M3, with following
restrictions:
Temperature -25 °C - +55 °C
Vibration 5-200 Hz (vertical, longitudinal, transversal axis)
Environmental conditions for mobile installation (during transport)
In line with IEC721-3-5: 5K1 and 5M3 with following restrictions:
Vibration 5-150 Hz (all axis), 1m/s², sinusoidal vibration
Environmental conditions for mobile installation (during operation)
In line with IEC721-3-3 (1997): 3K2 and 3M1 with following restrictions:
Temperature +15 °C to +35 °C
Relative Humidity 15% to 75% (non-condensing)
Vibration 40-200 Hz; 1m/s²; sinusoidal vibration
Physical emissions
Noise emission (sound power level according to ISO 7779)
During scanning max. 65 dB(A)
Standby max. 55 dB(A)
Heat emission CR 10-X CR 12-X, CR 15-X
Standby 41 W ≈ 140 BTU/h
1
22 W ≈ 75 BTU/h
1
Average power
consumption during
scanning
65 W ≈ 222 BTU/h
1
78 W ≈ 266 BTU/h
1
Peak power
consumption during
scanning
108 W ≈ 368 BTU/h
1
140 W ≈ 478 BTU/h
1
Cycle time
Cassette format 35 cm x 43 cm
Scan resolution CR 10-X CR 12-X, CR 15-X
200 µm - 58 s
76 | CR 10-X, CR 12-X, CR 15-X | Technical Data
2491E EN 20150409 1543