Charging a battery
To charge a battery using the battery charger:
1. Connect the power supply to the mains power and to the power socket of
the battery charger.
2. Insert the battery in an empty slot of the battery charger.
The battery charger automatically detects the battery and starts charging
the battery.
The battery status can be read from the indicator lights.
The charge level of the battery is monitored and it is kept at maximum
level until the battery is removed from the battery charger.
3. Remove the charged battery from the battery charger.
Related Links
Safety Directions for the DR Detector battery on page 66
DR Detector Battery Charger on page 20
Topics:
• Inserting the battery in the battery charger
• Battery charger indicator lights
• First use of a new battery
102 | DR 10e, DR 14e, DR 17e | Advanced Operating
0370C EN 20200228 1449
To Next Page
Loading...
