AGFA DR 10e - Step 5: Execute the Exposure

Step 5: execute the exposure
Press the exposure button to execute the exposure.
Make sure the generator is ready for exposure before you
press the exposure button.
WARNING:
The radiation indicator on the control console lights up
during exposure release.
WARNING:
Do not select another thumbnail until the preview image is
visible in the active thumbnail.
At the NX workstation:
• The image is acquired from the DR detector and displayed in the
thumbnail.
• If collimation is applied, the image is automatically cropped at the
collimation borders.
82 | DR 10e, DR 14e, DR 17e | Getting started
0370C EN 20200228 1449