AGFA DR 10e - DR Detector Registration Cable

DR Detector registration cable
The DR Detector registration cable is part of the wireless configuration and
required for initial setup and for sharing the DR Detector between NX
workstations.
The DR Detector registration cable connects the DR Detector to the network.
1 2 3 4
1.
Connector for the DR Detector
2.
Cable
3.
Part identification label
4.
Connector for the network switch
Figure 10: DR Detector registration cable
DR 10e, DR 14e, DR 17e | Introduction to the DR Detector | 27
0370C EN 20200228 1449