Messages
Under certain conditions the DR Detector shows a dialog box containing a
message in the middle of the screen of the NX workstation. This message
informs the user that either a problem has occurred or that a requested action
cannot be performed. The user must read these messages carefully. They will
provide information on what to do from then on. This will be either
performing an action to resolve the problem or to contact the local service
organization. Details on the contents of messages can be found in the service
documentation which is available to local service personnel.
Related Links
Problem solving on page 110
Detector Status Indicators on page 100
DR 10e, DR 14e, DR 17e | Introduction to the DR Detector | 39
0370C EN 20200228 1449
To Next Page
Loading...
