Stopping the DR Detector (wireless configuration)
WARNING:
When the detector will not be used for some time, remove the
battery. Otherwise, overdischarge may occur, leading to a
shorter battery life.
To stop the DR Detector:
1. Remove the battery.
a) Push the lock lever at the side with the dot.
b) Slide the lock lever in the direction of the arrow.
c) Grip the lock lever to pull out the battery.
2. Attach the cover plate to protect the battery bay.
92 | DR 10e, DR 14e, DR 17e | Getting started
0370C EN 20200228 1449
To Next Page
Loading...
