Open Flash
The flash is used to illuminate a subject in low light or for
fill-in lighting to achieve better illumination of a subject with
pronounced shadows.
1. To turn on the flash, press the flash
button.
2. Press the left button to enter the flash Functions menu.
3. Press the Left/Right button to select from the following
6 modes:
•
Flash: Auto
Camera flash goes off automatically based on
existing light conditions.
•
Flash: Red-eye reduction
The camera emits a brief flash before the picture
is taken to reduce red-eye effects.
•
Flash: Forced flash
Make forced flash at the moment of shooting.
•
Flash: Forced off
Flash is turned off.
•
Flash: Slow Synchro
This allows for night scenery photos that include
people in the foreground. The use of a tripod is
recommended when shooting with this setting.
•
Flash:Red-Eye+Slow Synchro
Using this mode for slow synchro shots with red-
eye reduction.
4. Press the
button to confirm the settings and exit
the option.
To Next Page
Loading...
