Beep
Use this setting to adjust the volume of the beep emitted
when buttons are pressed and change the tones for the
Shutter button, self-t
imer, and power-on/power-off.
To change this setting:
1. Select the
Beep
sett
ing from the
Setup
menu as
descr
ibed previously.
2. Use the
Up/Down
nav
igation buttons to switch
between volume, shutter, key, self-timer, and power
tone fields.
3. Press the Right button, then press the Up/Down button
to adjust the volume or change the tone, and press the
button to confirm the setting.
LCD Brightness
Use this setting to adjust the brightness of your LCD
screen.
1. Select the LCD Brightness sett
ing from the Setup
menu as described previously.
2. Select auto or adjust the brightness level using the
Left/Right button, and press the
button to confirm
the setting.
To Next Page
Loading...
