AgfaPhoto SELECTA 16 AgfaPhoto SELECTA 16
68 69
The video output signal can be switched to NTSC or PAL to
accommodate different regional standards. The appropriate
setting will vary between regions.
NTSC: USA, Canada, Ta
iwan, Japan, etc.
PAL:
Europe, Asia (excluding Taiwan), Oceania, etc.
Note:
The TV output w
ill not display properly if an
incorrect video system is selected.
Use this feature to switch the video system from either
NTSC or PAL.
1.
Select Video System
in the Transmission menu, then
press Right.
2. Use the Up/Down nav
igation buttons to select NTSC or
PAL. Then press the button to confirm.
Video System
CONNECTIONS
To Next Page
Loading...
