AgfaPhoto SELECTA 16 - Page 88

84 85
AgfaPhoto SELECTA 16 AgfaPhoto SELECTA 16
85
AgfaPhoto SELECTA 16 AgfaPhoto SELECTA 16
Problem Possible causes Solution
Write to memory card slowly • When movie above HD is recorded
into the memory card below
Class 4, perhaps it is too slow to
continue recording.
• Please select HCSD or shoot after
formatting this card.
Cannot write to the memory card • Memory card
is in write-protection
state.
• When shoot
ing or recording,
write-protection interruption
phenomenon in the memory card
(such as due to too slow storage
etc.) leads that you can not
continue to shoot or record. .
• Please replace a memory card.
•
Please shoot again.
Too many movies to process • The number of p
ictures or binders
in the memory card exceeded the
specifications, so the playback of
data folder can not be displayed.
• Delete needless files.
• Transfer the files
in the memory card to
other area.
Exceed maximum folder number in
the memory card
• “Yes”
is selected for “File No”
menu in the Menu (see P67 for
detailed instructions).
• Transfer the files in the memory card to
other area.
• Set “No” for “F
ile No”.