32 Agilent 1260 Infinity DAD and MWD User Manual
2
Site Requirements and Specifications
Performance Specifications
Control and data
evaluation
Agilent ChemStation for LC (32-bit) For 1260 systems:
• Revision B.04.02 DSP2 or
above
For 1100/1200 systems:
• Revision B.01.03 or above
Local Control Agilent Instant Pilot (G4208A) For 1260 systems:
• B.02.11 or above
For other systems:
• B.02.09 or above
Analog outputs Recorder/integrator: 100 mV or 1 V,
output range 0.001 – 2 AU, two
outputs
Communications Controller-area network (CAN),
RS-232C, APG Remote: ready, start,
stop and shut-down signals, LAN
Safety and
maintenance
Extensive diagnostics, error detection
and display (through control module
and ChemStation), leak detection,
safe leak handling, leak output signal
for shutdown of pumping system.
Low voltages in major maintenance
areas.
GLP features RFID for electronics records of flow
cell and UV lamp conditions (path
length, volume, product number,
serial number, test passed, usage)
Early maintenance feedback (EMF)
for continuous tracking of instrument
usage in terms of lamp burn time
with user-setable limits and feedback
messages. Electronic records of
maintenance and errors. Verification
of wavelength accuracy with built-in
holmium oxide filter.
Housing All materials recyclable.
Others Electronic temperature control (ETC)
for the complete optical unit
Tabl e 5 Performance Specifications G1365C
Type Specification Comments
To Next Page
Loading...
