141
Chapter 4 Remote Interface Reference
SCPI Command Summary
4
Command Summary
(see page 239 for more information)
CALibration?
CALibration
:SECure:STATe {OFF|ON},<
code>
:SECure:STATe?
:SECure:CODE <
new code>
:SETup <0|1|2|3| . . . |115>
:SETup?
:VALue <
value>
:VALue?
:COUNt?
:STRing <
quoted string>
:STRing?
*CLS
*ESR?
*ESE <
enable value>
*ESE?
*IDN?
*LRN?
*OPC
*OPC?
*PSC {0|1}
*PSC?
*RST
*SAV {0|1|2|3|4} State 0 is the instrument state at power down.
*RCL {0|1|2|3|4} States 1 through 4 are user-defined states.
*STB?
*SRE <
enable value>
*SRE?
*TRG
*TST?
Calibration Commands
IEEE 488.2 Common Commands
Parameters shown in bold are selected following a *RST (reset) command.
To Next Page
Loading...
