Chapter 10 401
Analyzer Options and Block Diagrams
Option Descriptions
Improved Amplitude Accuracy for PHS
(Option 052)
For 8593E, 8594E, 8595E, and 8596E only. Improved amplitude
accuracy for PHS. This is an amplitude calibration that improves
specifications to ±0.5 dB at 20-30 °C for the PHS frequency band in the
1895 to 1918 MHz frequency range.
Option 052 is also available as a service center only retrofit kit
(Option R52) after the purchase of your analyzer.
Improved Amplitude Accuracy for CDMA
(Option 053)
For 8591E, 8593E, 8594E, 8595E, and 8596E only. Improved amplitude
accuracy for CDMA. This is an amplitude calibration that improves
specifications to ±0.6 dB at 20-30 °C for CDMA 824 to 849 MHz and 869
to 894 MHz frequency ranges.
Option 053 is also available as a service center only retrofit kit
(Option R53) after the purchase of your analyzer.
Fast Time Domain Sweeps (Option 101)
For 8591E, 8593E, 8594E, 8595E, and 8596E only. Option 101 allows
sweep times down to 20 µs in zero span. In fast sweep times (sweep
times less than 20 ms), time domain sweeps are digitized. All trace
functions are available for these fast zero-span sweeps. Also see
Option 301 below.
Option 101 also adds the analog+ display mode and negative peak
detection to the analyzer. The analog+ display mode provides
traditional analog display operation combined with the advantages of
digital display features like markers, screen titles, and hard copy
output. The negative peak detector capability is useful for video
modulator balance adjustments and intermodulation distortion
measurements.
Option 101 is also available as a retrofit kit (Option R01) after the
purchase of your analyzer, or as a kit part number 5062-6458.
To Next Page
Loading...
Need help?
General
