486 Chapter12
Replaceable Parts
Replaceable Parts
Replaceable Parts
Major assembly and cable location information is given in Chapter 11.
The following tables and figures are also included in this chapter:
• Table 12-1 list reference designations, page 490 begins a list of
abbreviations, and Table 12-2 lists value multipliers used in the
parts lists.
• Table 12-2 lists standard value replacement capacitors.
• Table 12-3 lists standard value replacement resistors, 0.125 W.
• Table 12-4 lists standard value replacement resistors, 0.5 W.
• Table 12-5 lists all major assemblies, and all major mechanical and
electrical parts that are not part of a major assembly.
• Table 12-6 lists the cable assemblies.
• Table 12-7 lists available component-level information packets.
• Figure 12-1 through Figure 12-7 give the analyzer parts
identification information.
NOTE The parts lists, schematics, and component-location diagrams for
the 8590 E-Series and L-Series spectrum analyzers, 8591C cable TV
analyzers, and 8594Q QAM analyzers board assemblies are available
separately in the 8590 Series Analyzers Component-Level Repair
Service Guide.
To Next Page
Loading...
