3-2 Option 100 Fault Location and SRL
Making Fault Location Measurements
This chapter contains the following information:
• how to make and interpret fault location measurements
• example fault location measurements
NOTE Refer to “Fault Location Measurement Theory” on page 1-2 for detailed
information on how the analyzer measures fault location.
NOTE The procedures and illustrations in this manual assume the use of an
Agilent Technologies 8712ET or 8714ET. If you are using an Agilent
Technologies 8712ES or 8714ES, some key presses and displays will be
slightly different.
To Next Page
Loading...
Need help?
General
