Agilent Technologies 8712ET User Manual

Option 100 Fault Location and SRL 3-3
Making Fault Location Measurements
How to Make and Interpret Fault Location Measurements
How to Make and Interpret Fault
Location Measurements
A typical fault location measurement consists of the following steps:
1. Select fault location as the type of measurement
2. Enter the measurement parameters
3. Calibrate the analyzer
4. Connect the equipment
5. Interpret the measurement
The next few pages explain how to perform each of these steps.

Agilent Technologies 8712ET Specifications

General

Brand	Agilent Technologies
Model	8712ET
Category	Measuring Instruments
Language	English