7 Reference
146 Agilent 1000B Series Oscilloscopes User’s Guide
Environmental Conditions
Overvoltage Category
This product is intended to be powered by MAINS that comply to
Overvoltage Category II, which is typical of cord- and- plug connected
equipment.
Pollution Degree
The 1000B Series oscilloscope may be operated in environments of
Pollution Degree 2 (or Pollution Degree 1).
Pollution Degree Definitions
Pollution Degree 1: No pollution or only dry, non- conductive pollution
occurs. The pollution has no influence. Example: A clean room or climate
controlled office environment.
Pollution Degree 2. Normally only dry non- conductive pollution occurs.
Occasionally a temporary conductivity caused by condensation may occur.
Example: General indoor environment.
Pollution Degree 3: Conductive pollution occurs, or dry, non- conductive
pollution occurs which becomes conductive due to condensation which is
expected. Example: Sheltered outdoor environment.
To Next Page
Loading...
Need help?
General
