Displaying Data 2
Agilent 1000B Series Oscilloscopes User’s Guide 41
• Push the horizontal position knob to “zero” the trigger point (in other
words, move it to the center of the screen).
To display the zoomed time base
The zoomed time base (also known as delayed sweep time base), magnifies
a portion of the original waveform display (now on the top half of the
screen) and displays it in a zoomed time base on the bottom half of the
screen.
1 To toggle the zoomed time base “ON” or “OFF”, either push the
horizontal scale knob or press [Horiz] key followed by the Zoom softkey
in the Horizontal menu.
2 When the zoomed time base is “ON”:
• The top half of the display shows the original waveform and the
portion being magnified.
• The horizontal scale knob changes the magnification (widens or
narrows the area of magnification).
• The horizontal position knob moves the area of magnification
forward and backward on the original waveform.
• The bottom half of the display shows the magnified data in the
zoomed time base.
To Next Page
Loading...
Need help?
General
