Agilent Technologies DSO1024A User Manual

3Capturing Data
84 Agilent 1000B Series Oscilloscopes User’s Guide
To load a recording
1 In the Sequence menu ([Acquire] > Sequence > Mode=Storage), press Load.
2 If the External location has been selected, use the Disk Manager to
select and load the waveform recording file. See “Using the Disk
Manager” on page 122.
To import/export recordings
1 Because you can only export and import waveform recordings from an
external drive, select the External location. See “To select
internal/external recording storage location” on page 83.
2 In the Sequence menu ([Acquire] > Sequence > Mode=Storage), press
Imp./Exp..
3 Use the Disk Manager to select the file and import or export the
waveform recording. See “Using the Disk Manager” on page 122.

Agilent Technologies DSO1024A Specifications

General

Brand	Agilent Technologies
Model	DSO1024A
Category	Test Equipment
Language	English