The Keypad
The G1289/G1290 Keypad
29
Table 3, continued
Key Sequence Display Definition/Function
x 3
LOOP FILL TIME Time when gaseous contents of vial pass
through loop to vent
x 4
LOOP EQ. TIME Time when gases in loop equilibrate
x 5
INJECT TIME Time when gases in sample loop are swept
into the GC
FIRST VIAL First vial analyzed during the method
LAST VIAL Last vial analyzed during the method
x 2
SHAKE [0,1,2] Sets agitation level of oven carousel—
0 = off, 1 = low, 2 = high
LOAD METHOD Moves a method from stored to active
memory for current use
STORE METHOD Moves a method in active memory into one of
four memory storage locations
METH #’S Strings methods together to form a sequence
CARR.PRESS Displays current carrier gas pressure setpoint
VIAL PRESS Displays current vial pressurization pressure
setpoint
TRAY POSITION Moves slots in sample tray to their “home”
position. Use cursor keys to move slots
forward or backward by one position
Adds keyboard entry to current method
Cancels a keyboard entry. Displays menu top
level.
ADV FCTN Accesses nonroutine parameters. See “Using
the Adv Fctn Key” on page 40.
To Next Page
Loading...
