Using the Adv Fctn Key
Using an Advanced Function
40
Using the Adv Fctn Key
This chapter describes the nonroutine functions controlled by the Adv Fctn
key. It describes the displays, value ranges, and how to edit the setpoints for
these functions.
Using an Advanced Function
To access an advanced function setpoint or reading:
1. Press Adv Fctn, {1–9, .1, .2, .3}, and Enter.
2. Scroll to the desired subfunction, if applicable.
3. Key in the new value using the numeric keypad.
A flashing
* appears to the left of the new value as you enter it.
4. Press Enter to make the new value part of the active method.
If the new value is not within the allowed range, the sampler displays a
message showing the allowed range. Press any non-number key to remove
the error message.
At any point in a menu, press Clear to return to the top-level display.
See Table 4 (G1883) or Table 5 (G1289/G1290) for a quick reference of the
advanced functions, and “Advanced Function Descriptions” on page 44 for
details.
To Next Page
Loading...
Need help?
General
