Using the Adv Fctn Key
Advanced Function Descriptions
45
GC READY TYPE
G1883 Adv Fctn, 1, Enter
This function indicates the GC mode. Pressing Adv Fctn, 1, and Enter
displays the following message:
GC IS 6890 or the current set state.
Use the scroll key to choose a different mode. The following modes are
available:
GC1
GC2
5890/4890
NO GC READY
HANDSHAKE MODE
G1289/G1290 Adv Fctn, 9, Enter
A hardwired connection is built into the remote start cable between the 6890 or
6580 GC and the 7694 HS.
Press Adv Fctn, 9, and Enter to display the active mode. Use the scroll key to
choose a different mode. The following modes are available:
CHECK GC READY NO
The sampler will not wait for the GC ready signal.
CHECK GC READY WAIT -L 5890
The sampler waits for 5890 GC ready signal before beginning the
sequence. The headspace sampler’s Sample Equilibration Time is ignored;
the sequence is controlled by GC readiness.
CHECK GC READY WAIT -H 6890
To Next Page
Loading...
Need help?
General
