56 agria Two-Wheel Tractor 3400; 3400 KL
Operations
Start engine as described in “Starting the
Engine”
W
Check safety circuit function
- Only operate the machine if
safety circuit works!
Wear individual protective ear plugs and safety
shoes
1. Depress the safety circuit lever
2. Press switch to "I"
3. Pull the clutch lever
Engage appropriate gear
W
For work using the "Overdrive" version, in parti-
cular when cultivating the earth, do not engage
the 4th gear! - Risk of accident! (Lock off the 4th gear
with the locking screw, see page 34.)
For operations with PTO-powered attachments:
Move PTO speed shift lever (B/1, D/1, F/1, H/1)
forwards in driving direction – implement drive is
turned on.
Move F/R drive to position forward or reverse
Release the brake
Slowly release the hand clutch lever while press-
ing the throttle
Changing the travelling direction from forward
to reverse:
Set speed control lever to idling position.
Pull hand clutch lever and hold.
Move F/R drive to position reverse.
Slowly release hand clutch lever while pressing
the throttle.
Proceed vice versa for direction change from re-
verse to forward.
4. Commissioning and Operation
è I
1.
2.
1.
2.
3.
4
To Next Page
Loading...
