agria Two-Wheel Tractor 3400; 3400 KL 45
Front Weights and Wheel Weights
It is possible to attach front weights and wheel weights to improve traction.
Attaching Wheel Weights
Item. No. 3221 051
for drive-wheels 5.00-10, 5.00-12
Differential Version
Attach the weights to the wheels with
the hex head bolts, hex nuts and ser-
rated washers.
Tighten the hex nuts well!
Steering Brake Clutch Version
Attach the drive wheels to the tractor
using 2 customised wheel bolts (4; parts
kit no. 760 33) instead of the standard
wheel bolts and tighten them to a torque
of 100 Nm.
Attach the wheel weights to the custom-
ised wheel bolts using the hex head
bolts, hex nuts and serrated washers.
Tighten the hex nuts well!
Front weight
Item no. 3228 011
We recommend to use a front weight to
improve weight distribution when a
heavy implement is attached to the ma-
chine.
Stand
For parking the two-wheel tractor with no
implement mounted and for better cou-
pling of implements, the two-wheel tractor
is equipped with a stand (A/16 or C/16)
which is positioned at the front under the
engine protection base. For parking the
tractor, push the leg down and forward.
For parking, push it back up.
3. Devices and Operating Elements
Front weight
1 Hex head bolt
2 Serrated washer
3 Wheel weight
4 Customised wheel bolt
5 Ball spring ring
1 Hex head bolt
2 Serrated washer
3 Wheel weight
6 Hex head nut
3
Wheel weight for diff. version
Wheel weight for steering brake clutch version
To Next Page
Loading...
