agria Two-Wheel Tractor 3400; 3400 KL 79
5. Maintenance
Storage
For longer periods of no operation prepare two-wheel
tractor for storage. Proceed as follows:
a) Clean thoroughly
Repair paint coat.
b) Spray all shining parts and the cutter bar with Bio-slushing oil.
c) Engine preservation
l
Petrol Engine
– Drain fuel completely or fill fuel tank and add fuel stabilizer
(agria No. 799 09). - Observe enclosed instructions. Let
engine run for approx. 1 minute.
– Change the engine oil.
– Fill a tea-spoon (approx. 0.03l) of engine oil into the spark
plug opening. Slowly crank the engine.
– Reinstall the spark plug and set the piston to compression
via the recoil starter (pull the starter grip until resistance is
felt) – valves are closed.
– Slowly crank the engine after every 2–3 weeks (spark-plug
connector is removed). Then set the piston to compression again.
l
Diesel Engine
– Change engine oil.
– For longer storage, close exhaust pipe and air filter opening
with crape or similar tape.
d) Drive-wheels
Support drive-wheels in such a way that tyres have no ground
contact. Pneumatic tyres are quickly destroyed, if left stand-
ing under load and unsupported.
e) Parking
Because of severe corrosion do not park the tractor
- in humid rooms
- in rooms where fertilizer is stored
- in stables or adjacent rooms.
f) Covering the machine
Protect the machine with cloth or a similar cover.
5
To Next Page
Loading...
