Agria 3400 - Designation

12 agria Two-Wheel Tractor 3400; 3400 KL
Figure E
3 Tool kit
4 Handlebar
5 Clamping lever for height adjustment of steering handle
6 Hitch (floating drawbar)
7 Linch pin
8 Plug
9 Attachment bolts for wings and floating axle stop
10 Transmission oil filling opening and oil dip-stick
11 Eye bolt with cap nut, top
12 PTO
13 Link, PTO engagement
14 Eye bolt with cap nut, bottom
15 Weight mounting device and engine protection base
16 Stand
17 Name plate (on the right, in travel direction)
18 Oil dip-stick/oil controll plug,oil filling opening, clutch case
19 Machine identification no. (on right side, hammered into housing)
20 Oil drain plug, gearbox
23 Hex nut on hub
24 Steering brake clutch
25 Oil drain plug, clutch case
26 Operating hour counter
30 Fuse, relay (under the cover)
32 Socket (Accessory 3479 911)
Figure F:
1 PTO engagement lever
2 Spar locking lever
3 Press switch for safety circuit
4 Safety circuit lever
5 Clutch hand lever
7 Forward/Reverse ball handle
(with steering handle swivelled (front attachment) = Gear-shift ball
handle)
8 Gear-shift ball handle
(with steering handle swivelled (front attachment) = Forward/
Reverse ball handle)
9 Speed control lever
2 Steering brake clutch lever, left
13 Steering brake clutch lever, right
14 Central hand brake lever
15 Engine Shut-off Switch
Designation of Parts:
Petrol Engine / Steering Brake Clutch Version